• Available in 30' and 34' widths
• 4 ft. or 5 ft. bow spacing
• Bows are 1.90", 13 ga. galvanized steel tubing
• There is a truss assembly with every bow resulting in unmatched strength
• 5 purlins per 30' greenhouse and 7 purlins per 34' greenhouse
• Purlins connect to the bows using a strapping system which prevents unnecessary drilling into the bow
• Truss braces allow for additional purlin pipe to be hung for hanging baskets
• Wind bracing kits included with all greenhouses
• The height of the greenhouse can be raised with the extended ground posts option
• Truss supports allow for additional purlin pipe to be hung for hanging baskets
• Engineering meets International Building Codes(IBC)
• Plated ground posts available
• Poly size requirement:
  • 30' Nor' Easter - 48'
  • 34' Nor' Easter - 56'

Polycarbonate end walls include all 8mm clear polycarbonate warranted for 10 years, all aluminum extrusions and necessary hardware.

The mechanical ventilation option includes a fan(s) with an automatic belt tightener, aluminum shutters and thermostat(s).

The roll-up sides package includes everything to utilize the poly for a rollup sides including roller bars and all necessary hardware for 2 roll-up sides.

This option includes gear box operators and all hardware to facilitate the rolling up and down of the sides.

The ridge vent option includes the vent, the motor and the controller to incrementally open the vent in three stages.

The gas heat option includes Reznor heater(s), HAF fans to facilitate even heat distribution, a thermostat, a heater hanger and a double-walled vent pipe assembly.

The oil heat option includes an oil heater, HAF fans to facilitate even heat distribution and a thermostat.

Metal end wall framing kits are available for $680 per end which are recommended when using polycarb for end walls.